10,000+ Lumens | Full Range to 10 Lumens | Ambient | Open Source
Parts
All parts of the WindowLED project are listed below, where you can buy them from us or directly from our sources. You can return anything minus shipping cost. If there are any updates to parts, you can switch them out since everything is replaceable.
If you have any questions, first take a look at our Frequently Asked Questions (FAQ) and if you don’t find your answer, ask us directly. The limitations are also explained, which are open to suggestions and contributions through our community.
Power Supply Parts List
These are the individual parts needed to construct the power supply, which you may want to explore or buy directly from where we buy them. The cost for us is listed, and the cost of obtaining directly. The full cost for us is totaled below.
PART
DIRECT COST
DIRECT SOURCE
FROM US
Driver
$85.00
UPOWERTEK
$41.00
ABOVE
Internal Connectors
$2.30
DIGIKEY
$2.30
Cord
$30.00
DIGIKEY
$30.00
Female XLR Connector
$7.84
DIGIKEY
$7.84
Enclosure Square Tube
$7.84
Amazon
$7.84
Enclosure Tube Plugs
$3.30
Amazon
$3.30
Strain Relief
$5.00
Heyco
$0.25
Screws
$0.25
$0.25
Glue
$3.50
$3.50
Totals
Contents Total
$73.17
Labor, Overhead
$15.00
Total
$88.17
LED Assembly Parts List
These are the individual parts needed to construct the LED Assembly. The cost for us is listed, and the cost of obtaining directly. The full cost for us is totaled below.
You will need a thermal compound. We use the [] from [].
The mount and the LED cover are cut using a CNC lathe. You can find the [fab] files and diagrams, along with the lists of fasteners on our github page, where you are encouraged to contribute any ideas.
PART
DIRECT COST
DIRECT SOURCE
FROM US
LED
$23.56
DIGIKEY
$23.56
Heatsink
$14.49
DIGIKEY
$14.49
Wires and Connectors
DIGIKEY
$1.00
Mount
Fasteners
DIGIKEY
$1.00
Totals
Contents Total
$40.05
Labor, Overhead
$7.50
Total
$47.55
Cord
The cord goes from the driver, where it connects with a male XLR plug, up through the shaft, with a connector on the other end that snaps to the connector on the dimmer. The cord is a 5 conductor …
PART
DIRECT COST
DIRECT SOURCE
FROM US
Cord
XLR Male Connector
Connector
to Dimmer
Totals
Contents Total
$40.05
Labor, Overhead
$7.50
Total
$47.55
Dimmer
The dimmer is a rotary encoder and connectors soldered to a pcb. The cord and LED wires snap to the connectors. The pcb design and parts are listed on the github page.